CRF/XR80
|
 |
EO Ultimate 80 kit moves little
bikes up big hills.
Big
Bore kits Installation
Carburetor and Intake kits
Headwork and Cams
Exhaust
Systems Clutch parts
Suspension Goodies
for 80's |
|
| Description |
SKU # |
Price |
|
|
80120
BBK |
$649.95 |
 |
This
is the kit for you guys that are too big for 50's and 110's and all
the way fast kids out there.
120cc kit includes, Cylinder resleeve (exchange), piston/ rings/
pin/ clips/ head and base gaskets/ cam reground (exchange)/ valve
springs/ clutch gasket/ clutch plates/ clutch springs. You will need
to bore your case. Runs on pump gas.
This kit has 11.5:1 compression and makes 11 horsepower when
used with our Outlaw series high pipe and our 28/24 Carb kit. |
| |
Lower
end gasket and seal kit for 80/120 kit |
80120
GSK |
$49.95
|
| |
|
|
|
|
|
80120
INS |
$400.00 |
| |
Installation
of above including valve job and case machining. Send us your
complete assembled motor with no oil. We ship it back to you
assembled and adjusted. YOU MUST ADD OIL |
| |
Case
machining (cases only) |
80120
CMG |
$90.00 |
|
|
80120
SIK |
$199.95 |
| |
EO
22mm Carburetor and intake kit for CRF/XR80/120
This is a carb kit for modified 80/120cc motors. Provides great
low to mid response for 120cc motors. This is the smallest carb for
120cc.
Kit includes, carburetor, airbox boot or K&N filter and
throttle.
Yes it's to big for motors under 120cc. |
| |
EO
28/24 Flat Slide Intake kit (Lineaweaver Design)
24mm for 120cc motors without headwork.
28mm for 120cc and larger motors with headwork.
Kit includes, carburetor, custom intake manifold, air filter and
throttle cable. Don't fight a losing battle with jetting, start with
the right size carb. |
12024
FSK
12028 FSK |
$299.95 |
| |
EO
HiFlow air box modification.
Great for stock motors to full race configurations. |
80120
ABM |
$29.29 |
|
|
|
|
| |
Cylinder
head porting and intake matching.
We open your ports and match intake manifold size to work with your
choice of intake kits |
80120
CHP |
$249.95 |
| |
Slotted
Cam Sprocket
Allows your cam to be degreed professionally |
80120
SCS |
$34.95 |
| |
Special
Cam Sprocket Bolts
These bolts have a shoulder edge and washer face to correctly center
your slotted cam. |
80120
CSB |
$14.95 |
|
|
|
|
| |
EO
4 disc heavy duty clutch
Includes basket, center, springs and plates to convert to 4 plate
CRF/XR100 style clutch |
80120
HDC |
$249.95 |
| |
Barnett
heavy duty replacement clutch kit
Includes 4 plates, 4 springs and gasket. |
80120
BCK |
$79.95 |
|
|
|
|
 |
OUTLAW
series High Pipe with 4" SuperTrap
A real race proven pipe with SuperTrapp 4" tunable plates (CA and AMA 96 DB legal)
disperses noise radially with no loss in power.
Aluminum heat guard for enhanced rider protection. Outlaw pipes not
only look great they make better power across the whole RPM range,
this true megaphone design creates more low end and more top end
power. Why buy a LOUD BLING pipe when you get real performance in a
quality pipe that includes a tuned headpipe and spark arrester. This
pipe can take abuse and is ready to take on Hare Scrambles, TT,
Motocross and Supermotard.
Made in America Now with Ceramic Coated finish. |
80120
OHP |
$299.95 |
 |
OUTLAW
series Low Pipe
Positively the best dirt track pipe you can buy for your mini.
Shipped with open end and Ceramic coated finish. |
80120
OLP |
$299.95 |
|
|
|
|
| |
CRF/XR
80 and 100 Front Fork Modification with springs. We make your
forks work correctly. Lots of companies will sell you stiff (higher
rate) springs for less, but it's the valving that needs to be
reworked together with the springs for them to work correctly.
Your weight along with riding are taken into consideration. Setups
for trail, Supermoto, dirt track, Road race and Hare scrambles. (+
parts if needed) |
80120
FFM |
$190.00 |
| |
Std.
Work's Shock w/o Spring |
80120
WRK |
$299.95 |
| |
Heavy
Shock Springs Available in
different rates for your weight and application. |
80120
WHS |
$99.95 |
 |
CRF
/ XR 80 / 100 Frame stiffener.
Lower support cradle frame stiffener
Built for us by Banke Performance.
This is a must have for Supermoto, flat track, TT or Motocross.
Ties the front down tube to rear half of frame. Significantly
reduces frame flex. Adds engine protection. Powder-coated finish.
Available with or without aluminum skid plate. Skid plate available. |
80120
BFC |
$99.95 |
|
|
|
|
 |
Aluminum
motor mount brackets |
80120
AMM |
$39.95 |
| |
Pre
92 CDI stepped flywheel key |
80120
SFK |
$25.00 |
| |
Folding
shift lever |
80120
FSL |
$39.95 |
| |
Terminator
front brake cable / It stops. |
80120
TFC |
$34.95 |
| |
Light weight
flywheel modification. |
80120
LFM |
$125.00 |
ENGINES ONLY 512 B Dougherty Ave. Morgan Hill CA
95037
){kind=link}
){kind=link}