CRF150F
|
 |
 BIG BORE
KITS
INSTALLATION
CARB & INTAKE KITS
EXHAUST
HEADWORK & CAMS
SUSPENSION
GOODIES & GRAPHICS
|
|
| Description |
SKU # |
Price |
|
|
15025
BBK |
$1299.95 |
| |
CRF150F
to 250cc Big Bore kit
Fits 03-05 motors
Oh Yea! The BIG kit. This is not a pick a piston and stroke your
crank death wish motor kit. It is a well designed and reliable motor
kit for use with our cams, intake kits and Outlaw exhaust. Increase
your CRF150F to 247.54cc with an ENGINES ONLY Big bore kit. Runs
on pump gas, 91 octane / Big bore piston with 11.5:1
compression ratio / Kit includes New high compression piston with
rings and clips, head and base gaskets, cam chain tensioners,
Stroker crankshaft and all
hardware including manual compression release complete with lever
and cable and rocker cover modification. RUNS ON PUMP GAS |
 |
CRF150F to 225cc Big Bore kit
Fits 06 - 08 electric start motors ONLY
CRF150F to 225cc Big Bore kit
Increase your CRF150F to 225cc with an ENGINES ONLY 225cc Big bore
kit. This bolt on kit includes a new cylinder, piston, clips rings
and top end gaskets. 11.5 : 1 compression ratio
No cylinder exchange required. DYNO
CHART
Runs on pump gas 91 octane, We recommend our 28mm intake
kit and Outlaw exhaust with this kit. |
15022
BBK |
$599.95 |
 |
CRF150F
to 190cc Big Bore kit
 Fits
03-05 motors
Increase your CRF150 to 190cc with an ENGINES ONLY Big bore kit. Runs
on pump gas, 91 octane /
compression ratio / Kit includes cylinder resleeved (exchange), New 11.5:1
high compression piston with rings and clips, all top end gaskets.
Case machining required. |
15019
BBK |
$499.95 |
|
CRF150F
to 175cc Big Bore kit
Fits 03-05 motors
Increase your CRF150F to 175cc with an ENGINES ONLY Big bore kit. Runs
on pump gas, 91 octane / 67mm piston with 11.5:1
compression ratio / Kit includes cylinder resleeved (exchange), New
high compression piston with rings and clips, all top end gaskets.
This kit costs more because you must resleeve your cylinder at
67mm for a reliable motor.
**No case machining required** DYNO
CHART
|
15075
BBK |
$399.95 |
 |
CRF150F
to 170cc Big Bore kit
Fits 03-05 motors
Increase your CRF150F to 170cc with an ENGINES ONLY Big bore kit. Runs
on pump gas, 91 octane / 66.5mm piston with 11.5:1
compression ratio / Kit includes New high compression piston with
rings and clips, all top end gaskets.
** No case machining required**Bore Only**
|
15070
BBK |
$159.95 |
| |
|
|
|
| |
|
|
|
|
|
|
|
| |
170cc Kit
Installation
Send us your complete engine only (no oil) and we will do a top end
teardown, 3 angle valve job, cylinder bore and reassemble your
engine, valves adjusted and timing set.
(you add oil, motors shipped dry) |
15070
INS |
$300.00 |
| |
175cc Kit
Installation
Send us your complete engine only (no oil) and we will do a top end
teardown, 3 angle valve job and reassemble your engine, valves
adjusted and timing set. No case machining required.
(you add oil, motors shipped dry) |
15075
INS |
$250.00 |
| |
2006 225
kit installation
Send us your complete engine only (no oil) and we will do a top end
teardown, 3 angle valve job and reassemble your engine, valves
adjusted and timing set. No case
machining required.
(you add oil, motors shipped dry) |
15022
INS |
$250.00 |
| |
190cc
and 250cc Kit Installation
Send us your complete engine only (no oil) and we will do a complete
top and bottom end teardown, bore your cases, 3 angle valve job and reassemble your engine, valves
adjusted and timing set. Includes
case machining.
(you add oil, motors shipped dry) |
15025
INS |
$500.00 |
| |
Case
machining (cases only) 190cc and 250cc kits |
15025
CMG |
$90.00 |
|
|
|
|
 |
OUTLAW
series High pipe with 4" SUPERTRAP
This is simply the best pipe for your CRF150 or 230 in MX or
Enduro setup. SUPERTRAP tunable to meet performance and noise requirements.
Meets all AMA sound check standards.
Forest Service approved spark arrester. Now
stainless steel construction. |
15005
OHP
15006 OHP |
$349.95 |
 |
OUTLAW
series
Low pipe for flat track, supermoto and
road racing applications (Lineaweaver Design).
Now stainless steel construction.
2005 and earlier 15005 OLP
2006 and later 15006 OLP
|
15005
OLP
15006 OLP |
$349.95 |
|
|
15028
FSK |
$349.95 |
 |
CRF
150 28mm Flat Slide Intake Kit (Lineawaever Design) Includes
Carb. /cable /intake manifold and K&N filter or stock type air
box boot. |
CRF
150 32mm Flat Slide Intake Kit
For CRF 230 and our 250cc motor kits. Includes Carb. fully jetted,
intake manifold, airbox boot or K&N air filter, plus CR throttle
and cable. |
15032
FSK |
$499.95 |
| |
EO
HiFlow air box modification. |
23030
ABM |
$90.00 |
|
|
|
|
| |
Hi-Flow
Cylinder
head porting includes intake manifold matching for increased airflow. |
23030
CHP |
$250.00 |
| |
Camshafts
Stage #1 Torque Cam.
Stage #2 All Around Cam increases mid range.
Works well with stock rockers, requires springs only, no additional
work. Bolt in.
Stage #3 Dirt Track / TT / Supermoto Type. *
Stage #4 Full Race / Roadracing Type.*
*Requires EO spring kit and EO head modification.
Core charge if you do not send us your Stock cam $90.00 |
15001
CAM
15002 CAM
15003 CAM
15004 CAM |
EXCHANGE
$189.95 |
 |
Valve springs
Required for our all EO performance camshafts.
Includes high RPM spec intake and exhaust springs. |
15034
VSK |
$99.95 |
| |
Stage #3 &
#4 Head modification
Required for our stage #3 & #4 camshafts.
Includes seat modification and valve job. |
15034
HDM |
$250.00 |
| |
Slotted
Cam Sprocket
Allows your cam to be degreed perfectly. |
15023
SCS |
$44.95 |
|
|
|
|
 |
CRF150 and CRF230
Fork kit BOLT ON
This is the complete kit for your front end upgrade. Adding
stiff springs to your stock forks is not the same as an ENGINES ONLY
CRF150R fork conversion kit.
We take brand new Showa forks, these are revalved and resprung to your
weight and riding style at the highly respected Hlebo Bros.
Suspension Shop, we include a brake adapter plate so you can use
your CRF caliper instead of the single piston CRF150R caliper, steering
stop plate, long brake hose, CRF150R fender and screws (your 150F fender
will bottom on your tire), CRF150R number plate, fork guards and
screws, axle with nut and spacers along with modified CRF15R triple
clamps, bearings and bolts.
This is the only kit that is complete and ready to bolt on.
This is not a buy your fork tubes on E-Bay and spend the next six
weeks looking for parts to put you bike together. This is complete
and ready to ride kit and includes professional suspension shop
tuning for you.
Yes you can install this kit after dinner one night and ride
the next morning.
|
15085
FEK |
$1800.00 |
| Picture Coming
Soon |
Works Shock |
15000
WRK |
$599.95 |
|
|
|
|
| |
Shift Lever
1" longer folding shift lever for crf 150 03~06 |
15023
FSL |
$39.95 |
 GRAPHICS KITS |
ENGINES ONLY
Graphics kits now available.
 | EO Shrouds left and right side. fender arches
left and right. |
|
15023
GRA |
$79.95 |
20
years
